Application registered
Consultation
period
Application under consideration
Decision
made
Description
Single storey extension (as amended by drawing nos: 744-04C and 05A accompanying agents' letter dated 28 May 1997).
Location
The Forge Cottage, Hart Street, Henley-on-Thames.
Grid Reference
476185/182725
Applicant
Cleone Viscountess Parker
The Forge Cottage
Hart Street
HENLEY-ON-THAMES
Oxon RG9 2AR
Agent
David Tapp Associates
Redvers House
13 Fairmile
HENLEY-ON-THAMES
Oxon RG9 2JR
Constraints
Henley Main Area Conservation Area
Grade II Listed Building
Consultation / Notification
No further Representations on this application will be accepted.
Consultations / Notifications to date are shown below.
Name / Number
Date Sent
Response Date
c/o Mrs. J. E. Pickett
Town Hall,
Market Place,
HENLEY-ON-THAMES,
Oxon RG9 2AQ
26 06 1997
Tech.Dir,Babtie Engineering S.
02 05 1997
Blandy Cottage
Hart Street
HENLEY ON THAMES
Oxon
Timberloft
Hart Street
HENLEY ON THAMES
Oxon
31 Hart Street
HENLEY ON THAMES
Oxon
33 Hart Street
HENLEY ON THAMES
Oxon
Application Progress
Date Received
17th April 1997
Registration Date
17th April 1997
Start Consultation Period
17th April 1997
End Consultation Period
30th May 1997
Target Decision Date
12th June 1997
Decision
Planning Permission on 18th June 1997
Conditions / Refusal Reasons
That the development must be begun not later than the expiration of five
years beginning with the date of this permission and if this condition
is not complied with this permission shall lapse.
Reason: By virtue of Sections 91 to 95 of the Town and Country Planning
Act 1990.
That the materials to be used for the roof of the porch and the wall of
the entrance hall shall be of the same colour, type and texture as those
used on the walls and roofs of the existing dwelling.
Reason: To ensure that the details of the development are satisfactory.
That the materials to be used for the making good of the walls and roof
shall be of the same colour, type and texture as those used on the
existing building.
Reason: To ensure that the details of the development are satisfactory.
That development shall not begin until a detailed specification of the
type, design and external finish of the window, external door and means
of ventilation has been submitted to and approved in writing by the
Local Planning Authority.
Reason: To ensure that the details of the development are satisfactory.
Updates
These Planning
Application Details were returned live from our back office database,
and as such are as up to date as when the page was retrieved.